Looking for an Electrician in Basingstoke and Deane?

1) Cooker Circuit Installation in Basingstoke and Deane

I'm Darren May, the electrician behind MAYTRICS LIMITED. We install dedicated cooker circuits throughout Basingstoke and Deane for electric cookers, ceramic hobs, induction hobs and double ovens.

One emergency call-out we attended involved a customer whose electric cooker repeatedly tripped whenever it was used. Our initial visit was to investigate the fault, but after testing the appliance and existing circuit, we found the issue was not simply a faulty cooker.

The cooker had previously been connected by a handyman. Although the appliance had been wired, no proper assessment had been carried out to confirm whether the existing circuit was suitable for the electrical load. The customer had a large electric cooker with both a ceramic hob and double oven, and the existing circuit had not been designed to accommodate it safely.

2) REAL EXPERIENCE WITH COOKER CIRCUITS

Following our inspection, we explained the findings to the customer and advised that remedial works were required. We provided a quotation to install a new dedicated cooker circuit, which the customer accepted.

We then arranged a suitable installation date and installed a new circuit from the consumer unit using appropriately sized cabling and a suitable protective device. Once completed, the cooker operated correctly without overloading the circuit.

The work was inspected, tested and certified in accordance with BS 7671 before being put into service.

3) WHAT IS INCLUDED WITH A COOKER CIRCUIT INSTALLATION?

A cooker circuit installation can include:

• Assessment of the existing consumer unit
• Checking available capacity
• Reviewing the appliance rating
• Installing a new dedicated cooker circuit
• Appropriately sized cable
• Suitable protective device
• Cooker control unit where required
• Connection point for the appliance
• Testing and certification
• Building Regulations notification where required

Cooker circuits are not just about connecting live, neutral and earth. The circuit needs to be designed correctly for the appliance, cable route, protective device and installation conditions.

4) OUR PROCESS

The first step is to understand what appliance is being installed and what electrical supply is currently available.

Where required, we attend site to inspect the existing consumer unit, cable route and cooker position. We then assess whether the existing circuit can be used or whether a new circuit is required.

If remedial works or a new circuit are needed, we provide a clear quotation before proceeding.

Once accepted, we book the work in, keep the customer updated with booking reminders and notify them when we are on our way.

On the day, we carry out the installation safely, efficiently and with respect for the property. Once complete, the circuit is tested and the relevant certification is issued.

If the work is notifiable, we also submit the Building Regulations notification so the customer receives a Building Compliance Certificate.

5) PRICING

Cooker circuit installations in Basingstoke and Deane are typically between £300 and £500, depending on the cable route, consumer unit, circuit length and installation requirements.

We usually provide a fixed-price quotation upfront so there are no surprises.

All quotes and estimates are subject to testing and on-site assessment. If additional work is required, this is discussed with the customer before proceeding.

6) COMMON PROBLEMS WE SEE

One common issue is appliances being connected without checking whether the existing circuit is suitable.

A cooker may physically connect and even work for a while, but that does not mean the circuit has been correctly designed for the load.

We also see DIY or handyman-installed work where connections are loose, protective devices are unsuitable, or no testing has been carried out afterwards.

Electrical work is not just about getting something to work. It needs to be safe, correctly protected and compliant with BS 7671.

7) MATERIALS AND EQUIPMENT

We do not fit the cheapest products simply to reduce costs. We choose materials that offer a good balance of quality, reliability and long-term value.

For consumer units, we commonly install Scolmore Click Elucian.

For switches, sockets and accessories, we often use the Click range due to the clean finish and good overall quality.

Where customer-supplied appliances or accessories are involved, we are happy to install them where appropriate, provided they are suitable for the installation and comply with current regulations.

8) WHY CHOOSE MAYTRICS LIMITED?

• When you contact MAYTRICS LIMITED, you deal directly with me, Darren May. No AI receptionist. No call centre.
• We are Which? Trusted Trader approved, NICEIC registered, Part P certified and City & Guilds Level 3 qualified.
• We have over 175 Google reviews and 235 Checkatrade reviews.

We do not quote just to be the cheapest. Our focus is quality workmanship, customer service, compliance, reliability and doing the job properly first time.

9) FAQS

How much does a cooker circuit installation cost?

A cooker circuit installation is typically between £300 and £500, depending on the cable route, consumer unit and installation requirements. We aim to provide a fixed price upfront following assessment.

Do I need a dedicated circuit for an electric cooker?

In many cases, yes. Larger electric cookers, ceramic hobs, induction hobs and double ovens often require a dedicated circuit designed for the load of the appliance.

Can you check if my existing cooker circuit is suitable?

Yes. We can inspect the existing circuit, review the appliance rating and test the installation before advising whether the current circuit is suitable.

Do you provide certification?

Yes. Once the work is completed, we test the installation and issue the relevant electrical certification.

Is cooker circuit work notifiable?

Some cooker circuit work may be notifiable under Building Regulations. Where notification is required, we submit this online so the customer receives a Building Compliance Certificate.

Are you NICEIC registered?

Yes. MAYTRICS LIMITED is NICEIC registered, Part P certified, Which? Trusted Trader approved and City & Guilds Level 3 qualified.

Do you offer a guarantee?

Yes. We provide a 12-month workmanship guarantee, along with any applicable manufacturer warranty on materials supplied.

10) Contact us today

If you need a cooker circuit installed or want to check whether your existing cooker circuit is suitable, feel free to get in touch. I’ll give honest advice, explain what information I need and provide a clear quotation before any work goes ahead.

Call me on 01252 266277 or my mobile on 07984 060686. Also available on WhatsApp or via our contact form.